부양 로터 만드는 기계

기계 설명

기계 모델 : CPU20J-3A

우수한 F식사:

Our main activity is the manufacture of polyurethane cyclones .  Our knowledge and understanding of various polymers has also led us to diversify into the production of mold rubber parts to fulfill the different needs and applications required by many industries

혼합 장치:

배합에 필요한 총 주입량 및 혼합 비율의 매개변수에 따라 A, B, C는 높은{0}}온도 저항이 높고{1}}계량 정확도 오류가 있는 고정밀 정량 펌프를 선택합니다. (+0.5%)를 초과하지 않습니다. 원료의 온도, 점도 또는 압력이 변동할 때 측정 및 비율은 항상 정확하고 안정적입니다.

펌프의 변위를 정확하게 측정하기 위해 기계는 동기 모터와 감속기를 사용하여 액추에이터를 구동하고 속도를 변경하여 조정합니다.

믹스 머리:

The machine is equipped with precision gear pumps that are accurately controlled. This results in consistent pump output and ratio accuracy.

(1) 혼합 장치는 혼합 샤프트가 예상 및 채널링 없이 고속으로 작동할 수 있도록 절묘한 구조와 편리한 교체를 갖춘 반덤핑 장치를 채택합니다.{1}

(2) 믹싱 헤드는 직선형 톱니 믹싱 헤드 스테인리스강으로 만들어졌으며{1} 가볍고 내구성이 있어 균일한 혼합과 기포가 없습니다.

(3) The motor of the mixing head rotates at high speed in the mixing chamber by increasing the speed of the mixing head by frequency conversion. When the raw liquid is changed from a needle valve to pouring state, it enters the mixing chamber through the throttle hole and is injected onto the surface of the rotating rubber roller. When cleaning, the solvent enters the mixing chamber to clean the mixing head to ensure the next operation; static pressure is set on the feeding pipe, which can be fine-tuned with a viscosity less than 50 CPS to ensure the system pressure is stable, and the proportion of materials in the mixing process is stable as well.

기술적인 매개변수

출력 : 25Kg/min

삼상{0}} AC 380V + 제로 라인 + (접지) 주파수: 50HZ 총 전력 35KW 와이어 10 사각 라인

3. Air source: The outer diameter of the inlet pipe is 8mm and the pressure is 0.60.8MPa.

4. Three components mixing ratio: A: B= 100: 5  20

품질 보증

A. The seller's warranty period for normal use of the equipment is one year, except for wearing parts. The warranty period is calculated from the date of loading the equipment. During the warranty period, the seller shall provide free maintenance and replacement of parts for equipment damage under normal operating conditions.

B. During the use of the equipment, the buyer shall strictly follow the instructions and operating procedures provided by the seller. In case of damage caused by illegal use, the buyer shall bear the economic loss.

C. The seller shall provide the free charge repair kit for wearing parts. It will be shipped with the machine for the buyer's spare. After the warranty period, the seller will provide correct replacement parts and preferential parts price service.

D.  The raw materials, electronic components and parts purchased by our company all conform to the relevant national standards.

E. Provide online video inspection service and video recording service

F. Overseas agent after-sales service area

한국, 호주, 슬로베니아, 태국

인기 탭: 부양 로터 만드는 기계, 중국, 공급 업체, 제조업체, 공장, 도매, 구매, 저렴한, 대량, 맞춤형, 저렴한 가격, 재고 있음, 무료 샘플, 중국 제